Update and personalise your motorcycle with Revolution's aftermarket indicators - a style that doesn't cost a fortune. E-Mark certified, these Bullet rear indicators feature amber and red LEDs in sequential mode, for ultimate eye-catching brightness. Improve your bike's visibility in all traffic and weather conditions. Sold in pairs.
- Rear sequential indicators only
- Black plastic body
- 7x Amber LED (turn signal)
- 7x Red LED (stop/tail signal)
- Smoke lens
- M8 connector bolt
- Rubber mounted
- Bullet connection
- Resistor not included (resistors are sold separately, if required)
- 92mm (L) x 15.3mm (W) x 15.3mm (D)
- Voltage: 12V DC / Current: 0.17A / Power: 2W
- E8 certified
- Sold in pairs
Resistors:
- If your motorcycle is originally fitted with 21W bulbs, you will need to fit an 18W load resistor.
- If your motorcycle is originally fitted with 10W bulbs, an 8W resistor may be required.
- If you ride a Suzuki, an additional 8W resistor may be needed to regulate the flash rate.
Electronic Relay:
- If you don't want to use resistors, you may be able to replace your existing flasher relay with an electronic flasher relay, specifically designed for low-power indicators.
We recommend all motorcycle parts are fitted and tested by qualified professionals.
If you are unsure about the part choice for your bike, please contact us before purchase.
