Dynamat Xtreme Mega Pak:
This industrial-sized Mega Pak contains nine 24" x 48" flat sheets of Dynamat Xtreme. For any large job, and complete coverage on rear decks, doors, floors, and trunks. Use on rear decks, doors, floors, and the trunk to get more bass, more music, lower road noise and better sound. Create a solid, quiet luxury-car feel.
Total Coverage: 72 ft. sq. (6.69 m sq.)
Thickness: 1.72mm
This industrial-sized Mega Pak contains nine 24" x 48" flat sheets of Dynamat Xtreme for a total of 72 sq. ft. For complete coverage on rear decks, doors, floors and trunks.
Dynamat Mega Pak
Part Number: #10465
Contents: (9) 24"x 48" (609mm x 1219mm) sheets of Dynamat Xtreme
Dynamat Xtreme: Dynamat Xtreme is a black butyl-based core with 4 mil aluminium constrain layer, and craft paper release liner.
Description: Dynamat is a patented, lightweight elastomeric butyl and aluminium constrained-layer vibration damper. Dynamat conforms and fuses easily to sheet metal and other hard substrates. Material performance is optimized for temperature ranges between 14°F and 140°F (- 10°C to +60°C). Material can withstand temperature extremes between -65°F and +300°F (-54°C to +149°C) and is highly resistant to aging.
Applications: Dynamat can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). Dynamat is used to treat metal panels, partitions, duct doors, bins, panels and so forth in automobiles, railroad cars, buses, and ships. It is also used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer equipment, machine tools and many other objects that suffer from vibration-production noise.
Installation: Use scissors, knife or die to cut Dynamat to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a Dynamat roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce Dynamat’s sound damping capacity. Finish by covering all seams and wiring with DynaTape to ensure a professional look and finish. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.
